top of page
Adiuvo Engineering & Training logo
marketing-bg-landing-v3.jpg

We create detailed technical resources and how-tos. Here are some examples…

White papers & presentations

White papers

hema SOM whitepaper 211028-1.jpg

Benefits of System of Modules

This white paper looks at the benefits of using System of Modules in your application.

Adiuvo_Spartan6_to_7_Series_WhitePaper-1.jpg

Migrating Spartan 6 Designs to 7 Series and Beyond!

In this white paper, we are going to understand the differences between the Spartan-6 and 7 Series architectures. We will also discuss how we can select the most appropriate migration device from the 7 Series range along with how to migrate the tool chain from ISE to Vivado. This white paper will also examine how best to migrate a range of designs from pure RTL-based designs to those which contain a significant element of IP and softcore microcontrollers such as MicroBlaze within the programmable logic fabric.

Adiuvo_Spartan6_to_7_Series_WhitePaper_Hardware-1.jpg

Migrating Spartan 6 Designs to 7 Series and Beyond! - Hardware Considerations

In this white paper, we are going to understand the differences between the Spartan-6 and 7 Series architectures when designing the hardware. This will include looking at Packaging selection, Power Sequencing, IO banking and planning, Clock Planning, DDR memory support and planning and Power Estimation.

COP-White-Paper-1.jpg

Selecting the Correct Cost Optimized Portfolio Device for your Application

The Cost Optimised Portfolio from AMD Xilinx provides a range a FPGA and SoC which can be used for your application. This white paper will help you identify which one is most appropriate for your application.

Presentations

MicroBlaze Booting From QSPI Flash-1.png

MicroBlaze Booting From QSPI

This presentation walks through how to create a boot system for a MicroBlaze system when the main application runs from the DDR Memory. This system performs a boot load from the QSPI configuration memory. Arty S7-50 Implementation.

MicroBlaze Booting From QSPI Flash – Via Startupe3-1.png

MicroBlaze Booting from QSPI Via STARTUPE3

This presentation walks through how to create a boot system for a MicroBlaze system when the main application runs from the DDR Memory. This system performs a boot load from the QSPI configuration memory - KUC105 Implementation

dfx_lab-1.png

Partial Reconfiguration

A basic Introduction to Partial Reconfiguration targeting the KCU105 and ZCU104.

bottom of page